(708) 926-9567
Celebrating 10 Years of Excellence in Car Wash Chemicals and Car Wash Construction
Sku Images | Part# | Description | Diagram Part # | Quantity | |
---|---|---|---|---|---|
EM07.5-1800-213TC (EM10-1800-215TC) | ELECTRICAL MOTOR - 7.5HP (or 10HP,), 1770 RPM, Frame 213TC C-Face, (Shaft Dia. 1-3/8’’), Volts 208-230/460, Amps 21.7-19.6/9.80, 60Hz, 3Phase | 1 | 1 | ||
EL90STL125JIC1625ORB | GEAR PUMP INLET ELBOW 90° 1 1/4 JIC 37° Flare x 1-5/8”-12 UN/UNF-2A ORB, Steel | 2a | 1 | ||
GP09-P16 | GEAR PUMP displacement 1.27 [cu.in./rev.], 9.67GPM (at 1760RPM) haft dia. Æ7/8” straight -inlet (suction) 1-5/8”-12UN-2B, SAE20, Straight Thread -outlet (discharge) 1-1/16”-12UN-2B, SAE12, Straight Thread | 2 | 1 | ||
EL90STL075JIC10625ORB | GEAR PUMP OUTLET ELBOW 90° 3/4 JIC 37° Flare x 1-1/16” ORB, Steel | 2a | 1 | ||
CPU1-PL | FLEXIBLE SHAFT COUPLING LOVEJOY | 3 | 1 | ||
CPU1-PLM | (motor shaft dia. 1-3/8”, | 3 | - | ||
CPU1-PLP | pump shaft dia. 7/8”) | 3 | - | ||
CPU1-SP | w/SPIDER | 3 | 1 | ||
BH0807-F2B | BELL HOUSING | - | 1 | ||
BV3-4 | BALL VALVE 3?4 ” | 4 | 1 | ||
CPU2-NH-0807 | INTAKE HOSE - 1 –1/4’’I.D. x 16-1/2” LG. CRIMP FITTINGS | 5 | 1 | ||
1AV20MP20 | Male | - | - | ||
1AV20FJ20 | Female | - | - | ||
CPU2-DH-0807 | DISCHARGE HOSE (PRESSURE LINE) 1” I.D. x 17”LG. CRIMP FITTINGS | 6 | 1 | ||
1AA16MP16 | CRIMP FITTINGS 1” (for Discharge Hose): - Male (“Aeroquip”) | - | 1 | ||
1AA16FJ16 | Female (“Aeroquip”) | - | 1 | ||
CPU2R | Remote Pulse Kit | - | 1 | ||
CPU2RM | HYDRAULIC MOTOR, displacement 22.6 [cu.in./rev.] Parker Other | 7 | 1 | ||
SB2ABDA | OSCILLATING DISK | 8 | - | ||
CN1BD | Proximity Target | 9 | 1 | ||
CN1SW | PROXIMITY SWITCH | 10 | 1 | ||
CPU1-FC09 | FLOW CONTROL (SPEED CONTROL) Control Flow 8-16GPM, w/ports 1?2 ”NPT w/Hose 3/4’’I.D x 9-3/4’’ Lg, (Hydraulic Oil Line from pump ) | 11 | 1 | ||
CPU1-CV09 | DIRECTIONAL CONTROL VALVE, flow up to 18GPM, inlet & outlet ports 3?4 ”NPT, work port 1?2 ”NPT pressure up to 3000PSI, | 12 | 1 | ||
SS150 | HYDRAULIC SUCTION STRAINER, port 1 1?2” NPT | 13 | 1 | ||
SAE140140-24-12 | w/Reducer Bushing 11?2” NPT male x 3?4 ” NPT female | 13 | 1 | ||
CNCTSTL050JIC075MNPT | CONNECTOR 1/2” JIC x 3/4” NPT MALE w/HOLE | 14a | 1 | ||
NV1-4-1007 | MINI BALL VALVE- -1/4"NPT Male x female | 14b | 1 | ||
GP1500 | GAUGE 0-3000PSI bottom connection 1?4 ”, liquid filled | 15 | 1 | ||
LLS1-0507 | LOW LEVEL SWITCH 1?4 ” | 16 | 1 | ||
CPU3-T | TANK 30” x 16” x 20” -With 3 Couplings 3/4’’ (welded ) for following lines: Return, Pressure Out and Case Drain -w/two Couplings 3?4” (welded to tank), for Heat Exchanger’s tubing | 17 | 1 | ||
CPU2-V | COVER (LID) | - | 1 | ||
LS1 | LID SUPPORT | - | - | ||
CPU2-A | STAND (Legs: sq.tub. 1 1?2” x 1 1?2” x 18” lg.) | - | 1 | ||
SAE070115-8 | Tube support sleeves ½” JIC | - | - | ||
SAE070110-8 | Nuts ½” JIC | - | - | ||
- | - | - |