(708) 926-9567
Celebrating 10 Years of Excellence in Car Wash Chemicals and Car Wash Construction
Sku Images | Part# | Description | Diagram Part # | Quantity | |
---|---|---|---|---|---|
EM15-1800-254TC | ELECTRICAL MOTOR - 15HP, 1750RPM, Frame 254TC C-Face, (Shaft Dia. 1-5/8’’), Volts 230/460, Amps 36.6/18.3, 60Hz, 3Phase | 1 | 3 | ||
PS2H25-P20 | HYDRA-CELL” PUMP, displacement 4.4 [cu.in./rev.] 20GPM max. at 1150RPM max. (For this AVW Pumping Station: 20.9GPM at 1094RPM & 1085PSI)inlet port 1½”NPT, discharge port 1”NPT, shaft dia.Æ1-1/8”(use 10W30 hydra-oil), “WANNER ENGINEERING” | 2 | 3 | ||
PSH25-PP-5.00 | MOTOR PULLEY - 5.00”O.D. “APEX” | 4 | 3 | ||
PSH25-PP-8.00 | PUMP PULLEY - 8.00”O.D. “APEX” | 5 | 3 | ||
PSH25-XV-600 | V-BELT “DAYCO-POWER-WEDGE” 60”LG. (center distance 20”) | 6 | 9 | ||
PSH25-MB-0806 | SPLIT TAPER BUSHING 1-5/8” “APEX” for Motor Shaft | 7 | 3 | ||
PSH25-PB-0806 | SPLIT TAPER BUSHING 1-5/8” for Pump Pulley | 8 | 3 | ||
BV200X200 | PLASTIC BALL VALVE 2”NPT x 2”NPT (mounted to Hydraulic 0053uction Strainer’s pipe 2”) | - | 3 | ||
PSH25-RV20 | PRESSURE REGULATING VALVE, capacity 3-20GPM, 500-1000psi, port size 1”NPTF, “HYDRA-CELL”, “WANNER ENGINEERING” | 9 | 3 | ||
CNCTSTL100JIC100MNPT-TAP | STRAIGHT FITTING 1”MNPT x1”JIC w/HOLE | ||||
PS3H25-A | STAND (Legs: Sq.Tub. 2” x 2” x 27”LG.& 39’’LG) | 12 | 1 | ||
PS3H25-NHU | 2”I.D. x -”LG. (upper pump’s) | 1 | |||
PS3H25-NHM | 2”I.D. x -”LG. (Middle pump’s) | 1 | |||
PS3H25-NHL | 2”I.D. x -”LG. (lower pump’s) | 1 | |||
PS2H25-DHU | DISCHARGE HOSE (PRESSURE LINE): 1”I.D. x _19”LG. (upper pump’s) “Aeroquip” | 1 | |||
PS2H25-DHM | 1”I.D. x __”LG. (midle pump’s) “Aeroquip” | 1 | |||
PS2H25-DHL | 1”I.D. x 26-1/2”LG. (lower pump’s) “Aeroquip” (w/Crimp Fittings: one side-male, other side- female) | 1 | |||
1AA16MP16 | CRIMP FITTINGS 1” (for Discharge Hose): - Male (“Aeroquip”) | 3 | |||
1AA16FJ16 | Female (“Aeroquip”) | 3 |