(708) 926-9567
Celebrating 10 Years of Excellence in Car Wash Chemicals and Car Wash Construction
Sku Images | Part# | Description | Diagram Part # | Quantity | |
---|---|---|---|---|---|
WA1CB1AA | Extension Bar, for Wrap-Contour Third Leg | 1 | 1 | ||
WC3A | Leg, w/Manifold, for Wrap Mitter Combo Leg, SS | 2 | 3 | ||
WA1C-1566 | Z-CROSSBAR | 3 | 1 | ||
SQHS1213150 | Square Head Screw ½” – 13 x 1½” LG. (for sleeves) | - | 8 | ||
HHCS3816200F | Hex Head Cap Screw 3/8’’-16x2’’LG | - | 8 | ||
WA1WB | PILLOW BLOCK 2” | 4 | 4 | ||
HHCS1213225 | Hex Head Cap Screw ½” – 13 x 2 ¼” LG. | - | 8 | ||
FW12125 | Flat Washer ½”I.D. x 1 ¼” O.D. | - | 16 | ||
SLW1/2 | Split Lock Washer | - | 8 | ||
HN1213 | HEX NUT 1/2’’ | - | 8 | ||
WA1FA | SHOCK ABSORBER ASSEMBLY: | 7 | 2 | ||
WA1FAA | Shock Absorber | 7.1 | 2 | ||
WA1FA1 | UHMW Bushing 3/8” I.D. | 7.2 | 4 | ||
WA1FB | PIN Æ3/8” x 6” LG. | 7.3 | 4 | ||
WA1FC | COLLAR 3/8” | 7.4 | 4 | ||
WA1GA | RETRACT KIT: | 8 | 2 | ||
AC2X10 | AIR CYLINDER 2”x10” | 8.1 | 2 | ||
BJI-2-20 | Ball Joint Rod End | 8.2 | 2 | ||
WA2GA | FRONT MOUNT: | 8.3 | 2 | ||
WA2GA1 | Clevis | - | 2 | ||
WA2GA2 | Threaded rod ½” -13x5”LG. | - | 2 | ||
HN213 | -Hex Nut 1/2”-13 | - | 6 | ||
WA1GB | Pin 3/8”x1½”lg. | 8.4 | 2 | ||
CP3-8 | Cotter Pin | - | 2 | ||
WA1GC | Front pin ½” x 2” LG | 8.5 | 2 | ||
WA1GD | Collar ½” | 8.6 | 2 | ||
JN1220 | JAM NUT | - | 2 | ||
WA2F-0318 | Wrap Stabilizer Kit, with Fasteners and U-bolt Rear Mount to Arm; with 4" x 5-3/4" Heavy Duty Plate and Two U-bolts. (1 set - 2 pcs.) | 9 | 2 | ||
WA2FA | Shock Absorber Assembly | 7 | 2 | ||
WA2FC | Rear Stabilizer Mount | 9.1 | 2 | ||
WA2DAE | Stabilizer Bracket Kit | 9.2 | 2 | ||
WA2FB-0416 | Front Stabilizer Mount | 9.3 | 2 | ||
CB1AC | BUMPER ASSEMBLY | 11 | 2 | ||
CB1ACA | 2-Piece BUMPER MOUNT (w/Plate welded) | 11.1 | 2 | ||
HHCS3816150 | Hex Head Cap Screw 3/8’’-16x1-1/2’’lg | - | 2 | ||
SLW 3/8 | Split Lock Washer 3/8’’ | - | 2 | ||
HN3816 | HEX NUTS 3/8’’ | - | 2 | ||
WA1DBB | Rubber Bumper | 11.2 | 2 | ||
HHCS3816125 | Hex Head Cap Screw 3/8” – 16 x 1 ¼” LG | - | 2 | ||
FW38087 | Flat Washer 3/8” I.D. x 7/8” O.D | - | 2 | ||
RB1AE | BRUSH DRIVE LOWER ASSEMBLY | 13 | 2 | ||
RB1AEA | MOTOR MOUNT ( 8’’ LG ) | 13.1 | 2 | ||
HHCS1213300 | Hex Head Cap Screw ½” -13x3”lg. | - | 8 | ||
SLW12 | Split Lock Washer 1/2” | - | 8 | ||
TB1ADBM | HYDRAULIC MOTOR , displacement 5.0 [cu.in./rev.] | 13.2 | 2 | ||
SAE070202-8-8 | Fitting 90° elbow ½” NPTM x ½” JIC | 13.3 | 4 | ||
HHCS3816075 | w/Hex Head Screw | - | 8 | ||
STB-P1X100 | Split Taper Bushing P1 1” | 13.4 | 2 | ||
SSS1420050C | SPLIT TAPER BUSHING 1” | - | 2 | ||
RB2AEB-P1-1-0106 | (set w/two socket set screws ¼ ”-20x ½ ”lg., carbon steel) | 13.5 | 2 | ||
HHCS1213125 | Hex Head Screw 3/8’’-16x2’’Lg (Fully threaded, for pillow block adjusted) | - | 8 | ||
RB1AF | SHOCK ABSORBER ASSEMBLY | 14 | 2 | ||
RB1AFA | SPRING SHOCK ABSORBER | 14.1 | 2 | ||
RB1AFA1 | UHMW bushing 3/8”I.D | 14.2 | 2 | ||
RB2AFB | Spring adjuster assembly (aluminum 2-piece collar): | 14.3 | 2 | ||
RB2AFB1 | Aluminum adjuster (2-piece collar) | - | 2 | ||
HHCS1420125 | Hex head cap screw ¼” -20 x 1¼”LG. | - | 4 | ||
HN1420 | Hex nut ¼ ”-20 | - | 4 | ||
RB1AFC | Plastic spacer | - | 2 | ||
TB1AEA | PIN Ø 3/8” x 3” LG. | 14.4 | 4 | ||
RB1AG | FRONT MOUNT: | 14.5 | 4 | ||
RB1AGA | Shock mount | 14.7 | 2 | ||
RB1ABAM | Moveable Rear Shock Mount | 14.8 | 2 | ||
CB1AM-21/CB1AM-51 | LOWER BRUSH 21” / UPPER 51” ASSEMBLY: | 15 | 2 | ||
CB1AMA-21/CB1AMA-51 | Brush Cloth | 15.1 | 2 | ||
CB1AMC-21/CB1AMC-51 | Aluminum Extrusion | 15.2 | 2 | ||
CB1AMB-21/CB1AMB-51 | Two-piece Collar 1½”x12 core | 15.3 | 2 | ||
WA5K | WRAP AROUND SHAFT ASSEMBLY | 16 | 2 | ||
WA5KA | Motor Mount | 16.1 | 2 | ||
NLN3816 | Nylon Lock Nuts | - | 4 | ||
TB0195-WA1KM | Hydraulic Motor, displacement 11.9 [cu.in./rev.], Parker TB0195FP100AAAB | 16.2 | 2 | ||
WA1K1 | Torque Plate | 16.4 | 2 | ||
WA5KB | Brush Shaft Æ1 ½” x 10 ½” lg. | 16.4 | 2 | ||
WA1KCB | 4-bolt Bearing 1 ½” | 16.5 | 2 | ||
HHCS1213175 | Hex Head Cap Screw ½” – 13 x 1 ¾” lg. | - | 16 | ||
FW12100 | Flat Washer ½” I.D. x 1” O.D. | - | 16 | ||
WA1M-5/10x72 | BRUSH ASSEMBLY (design: 5” core, 72”lg.) | 17 | 2 | ||
WA1L | HYDRAULIC & WATER INSTALLATION | - | - | ||
WA1LA | Side Water Manifold Assembly (on exit legs): | - | 2 | ||
WA1LAA | Manifold | - | 2 | ||
SAE140109P-8 | Hollow Hex Plug ½” NPTM | - | 2 | ||
BRB1/2x1/2 | Barb ½” x ½” NPTM | - | 2 | ||
NZ1/4 | Nozzle ¼” NPTM | - | 10 | ||
PPP3/4 | Pipe Clamp ¾”, for water hose and side water manifolds (w/screw fasteners ¼”) | - | 10 | ||
SAE070115-8 | Tube support sleeves ½” JIC | - | |||
SAE070110-8 | Nuts ½” JIC | - | |||
WA1LB | Hydraulic hose assembly: | 8 | |||
SAE100R7-06x34 | Hydraulic Hose 3/8” I.D. x 34” lg., thermoplastic | - | 8 | ||
FC5810-0806 | Crimp Fitting SAE 37° JIC swivel (female) | - | 4 | ||
(10655-8-6) | Catching Fluidpower-“Parker | - | (4) | ||
FC5807-0806 | Crimp Fitting SAE 37° JIC male flare | - | 12 | ||
(10355-8-6) | Catching Fluidpower-“Par | (12) | |||
DMP1/2 | Damping Clamp ½”, for hydraulic tubes (w/screw fasteners ¼”) | 8 |